Electrical Contractors NICIEC
  Home
  Company profile
  Industrial
  Commercial
  Churches
  Domestic
  Testing
  NICEIC Requirements
  NICEIC 17th Edition
  FAQ's
  Client portfolio
  Contact us
  Solar Power
  Weblog

NICEIC Logo  Professional Electrical Contractor

Areas Covered
All of Essex, London & Hertfordshire

Including:

Barking
Barkingside
Basildon
Becontree
Chadwell Heath
Canvey Island
Chelmsford
Clacton
Colchester
Dagenham
Forest Gate
Gants Hill
Grays
Hainault
Harold Wood
Havering
Ilford
Leyton



North Ockendon
Pilgrims Hatch
Redbridge
Romford
Seven Kings
Southend-on-Sea
Stapleford Abbots
Upminster
Waltham Forest
Walthamstow
Woodford Bridge
Wanstead
Wickford



Phone Arkle Bros
020 8590 3321

Industrial | Commercial | Domestic | NICEIC Approved Electrical Contractors

Design Service
 Single Phase & Rewiring
Relocating or Upgrading?

We can completely rewire your new premises and design the whole project around your required layout.  Whether you require computer trunking services, ring mains or even a 3 phase supply, we can manage the complete project and make sure you satisfy the NICEIC full requirements in full including emergency lighting.

Our Commercial electrical engineers rewire shops, offices, hotels and all business premises.  We also carry out required periodic testing to NICEIC regulations.

go to top>>>
General Office Lighting Systems
Offices must conform to NICEIC requirements
Light Design Services

Whether you require a complete office lighting refit or rewiring or wish to review your emergency lighting system, wishing to extension an existing system, or make a small upgrade, Arkle Bros. (London) Ltd, will provide a full service review and approval certificates to ensure that all your systems and the emergency lighting conform with all relevant BS legislation.

go to top>>>
Computer Connections / Server Power Supplies
Offices must conform to NICEIC requirements
Office Safety

It's surprisingly easy these days to neglect electrical safety requirements. e.g. A typical scenario often occurs because we all have more computers/printers and ancilliary equipment than before.  Consequently they get plugged into typical 'christmas tree' extension arrangements and leads are running all over the place - quite hazardous !

We can trunk all your leads and ensure you are meeting the required safety standards.

go to top>>>
Dado Office & Skirting Trunking
Dado trunking systems
Dado Office Trunking

Cable management using Dado office and skirting solutions can provide for a tidy and safe way to connect your computers to an electric supply and also provide network solutions.  These solutions allow for speedy yet safety approved trunking at economic prices and keep all cables safe and out of sight.

We can trunk all your leads and ensure you are meeting the required safety standards providing for a cleaner safer and user-friendly office.

go to top>>>
Window & Product Display Lighting
Offices must conform to NICEIC requirements
Window / Product display lighting

Display lighting for Foyers, shop fronts and reception areas for product display and advertising are becoming increasingly popular.  You are responsible for public safety so it is very important these installations are installed and connected up by professionals.  We can advise on the most suitable lights to use and design effective displays for you.

It makes sense to use our comprehensive services.

go to top>>>
NICEIC Test and Inspections

No electrical system can be considered ‘Safe’ for use until it has been Tested & Inspected.  Furthermore, all electrical systems deteriorate with age and use, established systems should always be tested, on a scheduled basis, to ensure compliance with BS 7671.  This type of certification is now increasingly being required by Insurance Companies and the local HSE departments.

Under the Health and Safety at Work etc. Act 1974 which incorporates The Management of Health and Safety at Work regulations 1992, a statutory legal duty is placed on all Employers to ensure that employees and all others are not subjected to risks to their health and safety.  In particular, The Electricity at Work Regulations 1989 requires those in control of part or all of an electrical system to ensure that the system is safe to use and it is maintained in a safe condition.

Arkle Bros. (London) Ltd, carry out Periodic Inspection Reports to all types of Industrial premises.  This report will inform you of the condition of your electrical installation and any areas that do not meet current standards.  You are also issued a full report on any remedial works that maybe required to bring the installation to a ‘Satisfactory’ standard.


go to top>>>
PAT Testing
PAT Portable electrical Appliance testing

The level of inspection and testing required is dependant upon the risk of the appliance becoming faulty, which is dependant upon the type of appliance and the environment in which it is used.  PAT Testing forms an important part of the Safety at Work Act (1974).

The Health & Safety at Work Act 1974 puts the duty of care upon both the employer and the employee to ensure the safety of all persons using the work premises. This includes the self employed.



PAT Portable Appliance testing
The Management of Health & Safety at Work Regulations 1999 states: "Every employer shall make suitable and sufficient assessment of:
  • (a) the risks to the health and safety of his employees to which they are exposed whilst at work
  • (b) the risks to ensure the health and safety of persons not in his employment arising out of or in connection with the conduct by him or his undertaking."
The Provision and Use of Work Equipment Regulations 1998 states:  "Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair."

Increasingly the insurance industry is requiring that PAT Testing is carried out prior to the renewal of an insurance policy.  This is because over 1,000 work place accidents involving electric shock are reported to The Health & Safety Executive each year, many of which are fatal! Most of the reported accidents involve portable appliances.

The Electricity at Work Regulations place a legal responsibility on employers and self employed persons to take reasonable practical steps to ensure no danger results from the use of any electrical appliances.  This requires the introduction of a systematic and regular programmed schedule of maintenance, inspection and testing.  The Safety at Work Act places such an obligation in the following conditions:-
  • Where appliances are used by employees.
  • Where the public may use appliances in establishments such as hospitals, schools, hotels, shops, etc.
  • Where appliances are supplied or hired.
  • Where appliances are repaired or serviced.


go to top>>>
Emergency Lighting

PAT Portable Appliance testing

Emergency Exit sign and Lights


Whether you require a new emergency lighting system, extension of an existing system or just an upgrade, Arkle Bros. (London) Ltd, will provide advice of systems based on a knowledge from installing Emergency Lighting Systems applications into Churches, Offices and Industrial Units etc.

Arkle Bros Ltd will provide a full service to ensure that your emergency lighting system complies with all relevant legislation.

In many cases emergency lighting is wrongly regarded as a fit and forget product, whereas it should be subjected to frequent periodic testing.

Our Engineers have all the necessary expertise to design and install your emergency lighting systems and can offer a regular maintenance and testing schedule to ensure that your emergency lighting complies with BS 5266-1 regulations.

We are authorised to issue certification for the 6 month and annual tests as outlined in BS 5266-1. This standard provides information and guidance on the categories of emergency lighting systems and their suitability for premises with different occupancy.

The standards including characteristics of emergency lighting systems and the lighting levels that are required to deliver are also covered by BS EN 50172 and BS EN 1838 respectively.

go to top>>>
Security / Outside Lighting

We supply and install all types of security, outside and flood lighting to all types of premises and buildings including Churches, either operated by sensor and / or switching.


go to top>>>
Maintenance


Arkle Bros. (London) Ltd recognise the complex statutory legal obligations which you have to observe.  We will liaise and discuss your needs and obligations and work out your requirements.  Only then will we able to offer you a suitable maintenance contract.  Each of our Maintenance contracts is directly tailored to our client's needs.  No matter how big or small your company, we can help.

The routine maintenance for Lighting, Emergency Lighting and Switch Gear ensures that optimum levels of performance and safety are constantly achieved.  You can run your business safe in the knowledge that all your electrical legal obligations are fulfilled with our services.  Of course even the best maintained equipment can have a “bad-day”, if this happens rest assured we are on the end of a phone and can dispatch the relevant personnel to get your business running back to full capacity.


go to top>>>

Testing, Fire alarm, Wiring PAT

NICEIC Approved Contractor - Industrial   Commercial   Domestic - London / Essex

| Sitemap | XMLmap || Privacy



Website © more-clix.co.uk - June 2008


Commercial